Dragons Hobbies Forum

Radio Control and Models => Tyco RC => Topic started by: scorcher on December 20, 2009, 07:54:43

Title: my dagger has had the chop
Post by: scorcher on December 20, 2009, 07:54:43

i shoulda taking a pic of it before i started but heres what is was like
(https://www.dragonshobbies.com/forum/proxy.php?request=http%3A%2F%2Fimg85.imageshack.us%2Fimg85%2F6164%2Ftycodagger.jpg&hash=7c4b6458d1faca073e1eaced7250c847b6ed7405)
now it looks like this

1(https://www.dragonshobbies.com/forum/proxy.php?request=http%3A%2F%2Fimg51.imageshack.us%2Fimg51%2F2913%2Fangled.jpg&hash=d59257c9306b5f5716ca97035a8cdf4b66813e8d)

2(https://www.dragonshobbies.com/forum/proxy.php?request=http%3A%2F%2Fimg85.imageshack.us%2Fimg85%2F3102%2Fsideg.jpg&hash=cb9d713e836a9f4bca25536f40c2148c2a25d935)

ive put 2 small wheels on the front so it dont get stuck on un even surfaces
3(https://www.dragonshobbies.com/forum/proxy.php?request=http%3A%2F%2Fimg706.imageshack.us%2Fimg706%2F1338%2Ffrontwheels.jpg&hash=df42a2964f040bef2a4576415e49ed8e67f5843a)
4(https://www.dragonshobbies.com/forum/proxy.php?request=http%3A%2F%2Fimg706.imageshack.us%2Fimg706%2F3708%2Fbackb.jpg&hash=281ee963b1d81a26f541cd1b44d7d9b06cc29c22)
5(https://www.dragonshobbies.com/forum/proxy.php?request=http%3A%2F%2Fimg682.imageshack.us%2Fimg682%2F9930%2Fwheeliei.jpg&hash=72878b7ff01bd07352df9cc2c57b7303290d7536)
i had to put the wheely bar opposite way round coz it would just flip over doesnt do it now the car it self is a bit quiker and is better at steering to it doesnt wheely as much the front end stays down more might put a vid on here if any 1 wanna see it go wanted to kno if any 1 know that can it handle a 7.2v 1200mah pack let me know be most helpfull thanks

Title: Re: my dagger has had the chop
Post by: Dragon on December 23, 2009, 10:34:25

What is that front end from?

You said that the front end stays down more? Did you add some weight inside the front end?

Title: Re: my dagger has had the chop
Post by: scorcher on December 23, 2009, 11:20:52

ops should of explained that all i did was take the springs off and wheel there where 2 screw holes from taking them off so the little wheels screwed in them and the bit that pokes out is stuffed with blue tack to weigh it down a bit thats why it doesnt wheely as much no more and steers better cos it dont go straight up in the air no more and the bit i cut off the back doesnt make it back end heavy ant more