Radio Control and Models > Tyco RC

Tyco Compatible Controllers

(1/1)

Atomika:
I don't know about you guys, but I come across a lot of R/C's with out controllers. I thought I'd start a thread regarding what controllers will work with other vehicles.

The 49mhz Tripple Wheels works with the 49mhz Nitro Dozer.

The 27mhz Recoil works with the 27mhz Rebound.

I posted in another thread asking about the frequency of the old radio shack Dash 4X4 (Taiyo made) I found that the 49mhz Aero Turbo Hopper works with the Blue (49mhz)  Truck.

I'll post more as I go thru my collection.

5WheelScorcher:
I recently had a 6.0V Super Scorcher controller, it did NOT work with a 9.6V Scorcher. Both were 27MHz.

However it did control a 27MHz 6.0v Jacknife, (with a funny control scheme.)

So maybe the older 9.6 stuff isn't compatible with the later 6.0 vehicles.

Atomika:
Yeah I have yet to find a 6.0v that works with a 9.6v and vise versa. I've found some odd ball stuff that works oddly enough, like some weird no name brand controller I picked up works perfectly with my Edge Runner. One really odd thing I found was that a Golden Arrow controller works better than the original controller to the Nikko 1/8 Avalanche. I imagine its cause it runs on 6 AA and the original was only a 9v.

korreka:
Taiyo / Tyco Transmitter and Receiver Reference Table:

Navigation

[0] Message Index