Dragons Hobbies Forum

Radio Control and Models => Tyco RC => Topic started by: pendemic on August 14, 2010, 03:31:43

Title: Replacing motors in the fast traxx
Post by: pendemic on August 14, 2010, 03:31:43

Any suggestions? I know their 540 so ive been looking at a few online to replace em. Just need to find out the length and width and everything else in between.

Title: Re: Replacing motors in the fast traxx
Post by: scorcher on August 14, 2010, 03:34:54

the 9.6v fast traxx there not 540s there 370s

Title: Re: Replacing motors in the fast traxx
Post by: pendemic on August 14, 2010, 14:14:08

THANKS! think i can switch the motors out with something else

Title: Re: Replacing motors in the fast traxx
Post by: performerrpm on August 14, 2010, 16:37:52

i think your limited to stock type mabuchi 370s for the most part unless you wanna change out the electronics too.

Title: Re: Replacing motors in the fast traxx
Post by: scorcher on August 14, 2010, 16:41:29

Quote from: performerrpm on August 14, 2010, 16:37:52

i think your limited to stock type mabuchi 370s for the most part unless you wanna change out the electronics too.

thats right the main board wont take it if u go hobby parts way u will need a 2 channel reciever 2 esc's and a tx be good to see tho

Title: Re: Replacing motors in the fast traxx
Post by: pendemic on August 14, 2010, 23:28:47

dang, theres goes my experiment.