Dragons Hobbies Forum

Radio Control and Models => General RC => Topic started by: tycoharley on November 25, 2011, 12:25:16

Title: TYCO 6.0V Charger Modified With Tamiya connector
Post by: tycoharley on November 25, 2011, 12:25:16

Hello all i had an old tyco charger and wanted to try and use my ansmann Powerjack 6 Delta Peak 'Pro to charge the 6.0v packs up will try it over the weekend

Link to some pictures - http://s7.photobucket.com/albums/y268/Spouse/tyco%20hack/

Title: Re: TYCO 6.0V Charger Modified With Tamiya connector
Post by: tycoharley on November 29, 2011, 12:56:28

Full packs in less than 30 minutes great

Title: Re: TYCO 6.0V Charger Modified With Tamiya connector
Post by: stan on November 29, 2011, 14:01:43

very interesting. you think it would burn out the battery?
would it be possible to take a 12v 7ma ac adapter and convert it to take 9.6v?

Title: Re: TYCO 6.0V Charger Modified With Tamiya connector
Post by: tycoharley on November 30, 2011, 01:16:51

The Ansmann charger out put is 8.4v at 900mah with delta v which is working fine on the 6.0v packs switching to trickle when done

Now i am thinking about the 9.6 packs and what charger to use as all my current chargers are for 6/7 cells

Not sure on the 12v charger your talking about wouldn't know were to start