Blog
need pics of tyco hi jacker circutry board
by stan on 2009-03-16 23:58:24 UTC
i own a hi jacker always have since i was a tiny lil toddler afew years unage.
but all the wires came lose and im trying to fix it to get it rnning again...if some one can et me some pics of the bottom side of the cicuit board where all the ires are that woul be great
Replies
by st5150 on 2009-03-17 04:57:07 UTC
Look closely on both sides of the board, the wire colors were often printed on the board.... blk, wht, red, etc.
by stan on 2009-03-24 03:29:18 UTC
Look closely on both sides of the board, the wire colors were often printed on the board.... blk, wht, red, etc.
yes but theres 2 of each color printed on the board and theres 2 red 2 -3 green 2 yellow 2 white.... and no wires are connected so u see my delema?
by jeffescortlx on 2009-03-27 01:43:08 UTC
if you can post up a picture up your curcuit board, I think I can help you.
by stan on 2009-04-04 04:09:00 UTC
mmk here you go
by jeffescortlx on 2009-04-08 19:34:49 UTC
Well, I'd need a bigger, higher res picture then that to see the clues.
So looks like the servo is still hooked up? Just need to know where the motor and battery pack hook up?
by stan on 2009-04-12 05:55:30 UTC
only half the servo whires are hooked up, i need to know where the batter placement will be the motor and the on off switch and those are basicly all the same color, i tried putting a high res pic up but it exceeded the pic upload amount, i can try posting it on an upload sever and putting the link down later when i get a chance