Author Topic: Transmitter compatibility  (Read 3585 times)

nixzero

  • Bronze Level
  • **
  • Posts: 50
Transmitter compatibility
« on: April 13, 2012, 04:43:19 »
Hey everyone!  I've always been able to use my Tyco transmitter's interchangeably, with a few exceptions.  I was curious if anyone can verify that a Fast Traxx transmitter would also work with a Rebound.  They look identical (and yes, they are the same freq.), but either my Rebound is dead or my battery is...

The Rebound has no power LED that I can see, and it's the re-released one if that makes a difference.

korreka

  • Copper Level
  • *
  • Posts: 11
  • Where do I go from here?
    • Repair Toy grade RC cars
Re: Transmitter compatibility
« Reply #1 on: November 04, 2020, 11:53:10 »
Taiyo / Tyco Transmitter and Receiver Reference Table:


Dragon

  • Administrator
  • Platinum Level
  • *****
  • Posts: 4789
  • Have you played my board game?
    • Rival Troops
Re: Transmitter compatibility
« Reply #2 on: November 06, 2020, 14:00:14 »
Hi korreka, thanks for sharing the information here.
"Hello IT. Have you tried turning it off and on again? ... OK, well, the button on the side. Is it glowing?... Yeah, you need to turn it on. Err, the button turns it on. Yeah, you do know how a button works, don't you? No, not on clothes." - Roy (The IT Crowd)